SAS Gen3 Test Adapter

SAS-TPA-PRC (kit # 640-0038-000)

 

  

Differential Insertion Loss (SDD21) with mated plug and receptacle test fixtures. Measurement does not include test fixture calibration.

     

제품 사양

  

The SAS-TPA-PRC SAS test adapter or test fixture kit facilitates SAS Gen3 Source and Sink compliance testing for both Serial Attached SCSI Drives (SSD) hosts and devices.

Key Electrical:

  • 1.5 Gb/s, 3.0 Gb/s, 6.0 Gb/s, and 12.0 Gb/s data rates supported
  • Insertion loss < -3 dB @ 7.9 GHz mated plug and receptacle fixtures
  • Return loss < -20dB @ 7.2 GHz mated plug and receptacle fixtures
  • Differential Impedance 100 +/- 5 ohms
  • Single Ended Impedance 50 +/- 2.5 ohms

Key Mechanical:

  • High performance .086" Flexible SMA coaxial cables
  • All critical components are enclosed to facilitate robustness
  • Coax cables are enclosed in a rotation compliant strain relief
  • Coax cables are axially retained in the fixture enclosure

Calibration Cables:

  • Use to compensate for test fixture losses and phase delay
  • 1X & 2X SMA to SMA cables facilitate using SMA Coax Standards
  • 2X THRU insertion loss < -3 dB @ 12.6 GHz
  • 2X THRU return loss < -20dB @ 4.4 GHz
  • Optional dual calibration cables available

Differential Return Loss (SDD11) with mated plug and receptacle test fixtures. Measurement does not include test fixture calibration.

 

12.0 Gbs Eye (PRBS 2^11-1) (SDD21) with mated plug and receptacle test fixtures. Measurement does not include test fixture calibration

 

 

자료실

제     목

다운로드

등록된 자료가 없습니다.
필요하신 자료가 있으시면 1600-9545로 요청해주세요.